ASTM A633
The ASTM A633 specification is the Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates when superior notch toughness is needed at low temperatures. Grades C is available up to 4" in thickness and Grade E is available up to 6" in thickness. Typical applications are utility poles as plates, offshore platforms, construction equipment frames, electric shovel dipper handles and suspension components.
Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm with normalized heat treatment.The original mill test certificate shall be issued under format EN10204 3.1 or EN10204 3.2 if customer need the third party inspections.
Technical Requirements & Additional Services:
♦ High tension test
♦ Low temperature impacting test
♦ Simulated post-welded heat treatment (PWHT)
♦ All thickness for this grade shall be done Normalized
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user's demands
Mechnical property for A633GrE low alloy steel:
Thickness(mm) | Yield strength (≥Mpa) | Tensile strength (≥Mpa) | Elongation in ≥,% | |
T≤65 | 415 | 550-690 | 200mm | 50mm |
65<T≤100 | 415 | 550-690 | ||
100<T | 380 | 515-655 | 18 | 23 |
Main chemical elements composition of A633GrE | |||||||
C | Si | Mn | P | S | Alt (Min) | V | N |
0.22 | 0.15-0.50 | 1.15-1.50 | 0.035 | 0.04 | 0.018 | 0.04-0.11 | 0.03 |
Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties.
Read MoreWe stock and supply a wide range of boiler steel plate grades for working environments where safe operating temperature is critical.
Read MoreWe have earned an outstanding reputation for profession in exporting shipbuilding steel.
Read MoreWeathering steel, often referred to by the genericised trademark COR-TEN steel and sometimes written without the hyphen as corten steel
Read MoreAlloy Steel Plate has many applications across many industries. It is easy to weld and has great corrosion resistance.
Read MoreNow more and more world's people foucs on protecting our enviroment,the new clean energy nature gas is widely used through pipelines.
Read MoreStainless steel is a group of iron-based alloys that contain a minimum of approximately 11% chromium..
Read MoreGas cylinder steel main used in gas cylinder products. Better anti-stress capability is a basic performance steel cylinders...
Read More