Unlike any other structural specification under EN10025 S460 material does not have any direct equivalents in ASTM or Shipbuilding (ABS/BV/LR) designations.
S460NL & S460ML is used in a number of offshore and onshore applications e.g. legs supports for a jack up platform offshore and as mooring piles for a LNG onshore terminal.
S460NL
A normalised material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460NL is produced under European designation EN10025-3.
S460ML
A thermo-mechanically rolled material with a minimum yield strength of 450 N/mm2 that has been impact tested at -50°C. S460ML is produced under European designation EN10025-4 (TMCP).
are able to supply a wide range of S460 material (in both normalised and TMCP conditions), our material ranges from 6mm to 80mm thick and up to 3 metre’s wide and 12 metre’s in length.
Chemical Composition of S460NL & S460ML
Grade | C | Si | Mn | P | S | N | Al | Cu | Cr | Ni | Mo | Nb | V | Ti |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
S460NL | 0.20 | 0.60 | 1.00/1.70 | 0.025 | 0.020 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.10 | 0.050 | 0.20 | 0.05 |
S460ML | 0.16 | 0.60 | 1.70 | 0.025 | 0.025 | 0.025 | 0.020 | 0.55 | 0.30 | 0.80 | 0.20 | 0.05 | 0.12 | 0.05 |
Main chemical composition in EN 10113-3 S460ML steel is carton max 0.16, silicon max 0.60, manganese max 1.70, phosphorus max 0.025, Sulphur max 0.02, chromium max 0.30. More detailed information about S460ML steel, please refer to the down table:
Grade |
C |
Si |
Mn |
P |
S |
N |
AL |
Nb |
V |
Ti |
Cr |
Ni |
Mo |
Cu |
CEV |
S420ML |
0.16% |
0.60% |
1.70% |
0.025% |
0.02% |
0.025% |
0.02% |
0.05% |
0.12% |
0.05% |
0.30% |
0.80% |
0.20% |
0.55% |
0.48% |
EN10113-3 S460ML is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.
Temperature |
-50 |
-40 |
-30 |
-20 |
-10 |
0 |
20 |
Notch impact test. Min. absorbed energy |
27 |
31 |
40 |
47 |
51 |
55 |
63 |
Nominal thickness(mm) |
to 16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-120 |
ReH-Minimun yield strength(Mpa) |
460 |
440 |
430 |
410 |
400 |
385 |
Nominal thickness(mm) |
to 40 |
40-63 |
63-80 |
80-100 |
100-120 |
Rm-Tensile strength(Mpa) |
540-720 |
530-710 |
510-690 |
500-680 |
490-660 |
Nominal thickness(mm) |
- |
||||
A-Minimum elongation |
17 |
Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties.
Read MoreWe stock and supply a wide range of boiler steel plate grades for working environments where safe operating temperature is critical.
Read MoreWe have earned an outstanding reputation for profession in exporting shipbuilding steel.
Read MoreWeathering steel, often referred to by the genericised trademark COR-TEN steel and sometimes written without the hyphen as corten steel
Read MoreAlloy Steel Plate has many applications across many industries. It is easy to weld and has great corrosion resistance.
Read MoreNow more and more world's people foucs on protecting our enviroment,the new clean energy nature gas is widely used through pipelines.
Read MoreStainless steel is a group of iron-based alloys that contain a minimum of approximately 11% chromium..
Read MoreGas cylinder steel main used in gas cylinder products. Better anti-stress capability is a basic performance steel cylinders...
Read More